Voltage Regulator for Kawasaki KZ 1000 1100 & ZX 750 1100 1981-2003 2005 OEM Repl. # 21066-1018

CAD$ 124.00
Availability: In stock
SKU
RM30004

Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

21066-1018

Dimensions:
Width: 80mm
Length: 90mm
Height: 28mm
Wires length: 220mm
Fixation holes center to center: 65mm

Other specifications:
Number of plugs: 1
Number of pins: 5
Number of wires: 5
Minimum Charging Voltage: 14.5V +/- 0.5V
Maximum Charging Current: 50A/500W
Open Circuit Voltage: <15V
Operation Temperature: -20⁰ to 85⁰

Before installing your new regulator/rectifier:
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors.

Brand new voltage regulator rectifier

  • Direct replacement to your original unit.
  • Plug-and-play, direct fit, easy installation.
  • No assembly required
  • The Quality exceeds the OEM equipment
  • Improved heat sink and charging capabilities
  • Higher grade of electric components.
  • All products shipped are tested

*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

Write Your Own Review
You're reviewing:Voltage Regulator for Kawasaki KZ 1000 1100 & ZX 750 1100 1981-2003 2005 OEM Repl. # 21066-1018
Your Rating
Customers Also Viewed
Currently there is no product to display.