Voltage Regulator for Kawasaki Ninja EX 250 500 | Vulcan 500 EN 450 / 500 | Eliminator 250 | KLE500 1972-2009 21066-1030

CAD$ 134.00
Availability: In stock
SKU
RMS020-105860

Battery condition is important. No regulator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

21066-1030
21066-1028

Dimensions:
Width: 78 mm
Length: 80 mm
Height: 32 mm
Wires length: 170 mm
Fixation holes center to center: 60 mm

Other specifications:
Number of plugs: 1
Number of pins: 6
Number of wires: 6
Minimum Charging Voltage: 14.5 V +- 0.5 V
Maximum Charging Current: 50 A / 500 W
Open Circuit Voltage: 15 V
Operation Temperature: -20⁰ to 85⁰

Before installing your new Voltage Regulator Rectifier:

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator rectifier.
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors.

Brand new aftermarket Voltage Regulator Rectifier

  • Direct replacement to your original unit.
  • Plug-and-play, direct fit, easy installation.
  • No assembly required
  • Higher grade of electric components.
  • Improved heat sink and charging capabilities
  • The quality exceeds the OEM equipment
  • All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and are a major cause of repetitive electrical issues.

All item pictures are accurate, if in doubt, do not hesitate and compare our item to your original part.

Write Your Own Review
You're reviewing:Voltage Regulator for Kawasaki Ninja EX 250 500 | Vulcan 500 EN 450 / 500 | Eliminator 250 | KLE500 1972-2009 21066-1030
Your Rating
Customers Also Viewed
Currently there is no product to display.