Generator Stator for Arctic Cat & Textron Wildcat 4 / Wildcat X / Wildcat 4X 1000 2012-2019 | OEM# 0802-072 / 0802-064

• 2019 Textron Wildcat X 1000
• 2018 Textron Wildcat X 1000
• 2018 Textron Wildcat 4X 1000
• 2016 Arctic Cat Wildcat X 1000
• 2016 Arctic Cat Wildcat 4X 1000
• 2015 Arctic Cat Wildcat X 1000
• 2015 Arctic Cat Wildcat 4X 1000
• 2015 Arctic Cat Wildcat 1000
• 2014 Arctic Cat Wildcat X 1000
• 2014 Arctic Cat Wildcat 4X 1000
• 2014 Arctic Cat Wildcat 4 1000
• 2014 Arctic Cat Wildcat 1000
• 2013 Arctic Cat Wildcat X 1000
• 2013 Arctic Cat Wildcat 4 1000
• 2013 Arctic Cat Wildcat 1000
• 2012 Arctic Cat Wildcat 1000

Dimensions

Interior Diameter : 54 mm
Exterior Diameter : 126 mm
Thickness : 20 mm
Number of wires : 5
Number of plugs : 2

Alternator : Yellow to Yellow = 0.4 ohms +/- 20 %
Pickup Coil : Blue to White = 200 ohms +/- 20 %

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".