- Store vehicles in your garage
- Get product recommendations
- Easily find products and accessories
Stator Pickup Pulsar Coil for Can-Am DS 650 Baja / Baja X 2000-2007
Stator Pickup Pulsar Coil for Can-Am DS 650 Baja / Baja X 2000-2007





Details
Details
Brand new pick up coil for stator 300 ohms
- We offer a brand new pickup/pulsar coil for you to repair your stator.
- Often unavailable from the OEM manufacturer
- All products shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Specifications
Specifications
Height: 22 mm
Length: 25 mm
Width: 23 mm
Bracket center to center: 35 mm
Wires length pickup coil to grommet: 25 mm
Wires length grommet to plug: 400 mm
Other specifications:
Number of wires : 2
Number of plugs: 1
Number of pins: 2
Wire to wire resistance:
Green/White to Blue/Yellow = 295 ohms +/-20%
Interchange Part Nº
Interchange Part Nº
- 711265153
- 420265153
- 711265156
Installation
Installation
Not following these instructions may result in damaging the part or other components on your vehicle.
- By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
- Insulate your solders with heat shrink.
- Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
- Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
- If no spark or erratic spark, switch the wires at the plug.
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Vehicle Fitments
Vehicle Fitments
Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.