Ignition Timing Sensor for Arctic Cat M 8000 XF 8000 ZR 8000 CFR CF 800 Crossfire XF 800 M8 F8 Firecat F1000 2007-2017

$USD 59.00
Availability: In stock
SKU
RM00166

Please take note: There are 2 pick up coils possible. This one has a female connector and the other a female. The other option is RM00131.



Please compare your original part to our photos, before buying.

3007-318
Dimensions:
Height: 18 mm
Length: 24 mm
Width: 19 mm
Bracket center to center: 35 mm
Wire length : 400 mm

Other specifications:

Wire to wire resistance:
Brown/Green To Green/White = 200 ohms +/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.

  • By using a small soldering iron, weld the wires to the ones on your OEM wiring harness.
  • Insulate your solders with heat shrink.
  • Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
  • Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
  • If no spark or erratic spark, switch the wires at the plug.

Brand new Ignition Timing Sensor for Stator 200 ohms

  • We offer a brand new pickup/pulsar coil for you to repair your stator.
  • Often unavailable from the OEM manufacturer
  • All products shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Ignition Timing Sensor for Arctic Cat M 8000 XF 8000 ZR 8000 CFR CF 800 Crossfire XF 800 M8 F8 Firecat F1000 2007-2017
Your Rating
Customers Also Viewed
Currently there is no product to display.