Stator for Polaris Big Boss / Magnum / Ranger / Scrambler / Sportsman / Worker 500 1997-2001 | OEM# 3085561 / 3086821

$USD 179.00
Availability: In stock
There are two possible stators for many Polaris models :

  • For the Magnum 500, Big Boss 500, Scrambler 500 and Sportsman 500 2000. This stator fits S# 00-01960 and before. For S# 00-01961 and after, the right stator is RM01347.

  • Always check in the 'Fits models' section and please compare to your original part before buying.

    Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.


    Interior diameter: 51 mm
    Exterior diameter: 114 mm
    Thickness: 20 mm

    Other specifications:
    Number of wires: 9
    Number of plugs: 7
    Number of pins: 10

    Wire to wire resistance:
    Alternator: Yellow to Yellow/Red = 0.6 ohms +/-20%
    Pickup: White to White/Red = 100 ohms +/-20%
    Source: Green to Red/Black = 450 ohms +/-20%
    Source 2: Green to Black = 3.8 ohms +/-20%

    Before installing your new stator
    • Check the AC output of the stator.
    • Replace any burned or corroded connectors on stator and regulator/rectifier
    • Check and repair any melted wiring.
    • Use hi-temp dielectric grease on all connectors

    Our stator may use a different wire color code than your original.
    All the wires are installed in the correct order; please do not change any of the wiring configurations.
    This stator is designed as a direct plug-in replacement and should be used as such.

    When bolting stator in, always use locking compound.
    If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

    Brand new stator

    • Direct replacement to your original unit
    • Plug-and-play, direct fit, easy installation.
    • Highest grade of lamination materials
    • Highest grade of copper winding, resistant to 200 degrees Celsius.
    • Pick up pulsar coil included
    • Connector included
    • Rubber grommet included
    • All products shipped are tested

    *All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

    Write Your Own Review
    You're reviewing:Stator for Polaris Big Boss / Magnum / Ranger / Scrambler / Sportsman / Worker 500 1997-2001 | OEM# 3085561 / 3086821
    Your Rating
    Customers Also Viewed
    Currently there is no product to display.