High Output Stator for Suzuki LT 250 R Quadracer | LT 500 R Quadracer 1985-1992 | # 32101-43B00 32101-19A00
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 1992 Suzuki LT 250 R Quadracer
- 1991 Suzuki LT 250 R Quadracer
- 1990 Suzuki LT 500 R Quadracer
- 1990 Suzuki LT 250 R Quadracer
- 1989 Suzuki LT 500 R Quadracer
- 1989 Suzuki LT 250 R Quadracer
- 1988 Suzuki LT 500 R Quadracer
- 1988 Suzuki LT 250 R Quadracer
- 1987 Suzuki LT 500 R Quadracer
- 1987 Suzuki LT 250 R Quadracer
- 1986 Suzuki LT 250 R Quadracer
- 1985 Suzuki LT 250 R Quadracer
32101-43B00
Dimensions:
Interior diameter: 30 mm
Exterior diameter: 83 mm
Thickness: 35 mm
Other specifications:
Number of wires: 4
Number of plugs: 4
Number of pins: 4
Wire to wire resistance:
Alternator: Yellow/Red to Black/White = 1.6 ohms +/-20%
Pickup: Blue to Black/White = 142 ohms +/-20%
Source: Black/Red to Black/White = 367 ohms +/-20%
Before installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.
Brand new 130 W high output aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- Back Plate included
- All products shipped are tested
20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.