Stator for Kawasaki KZ 650 750 1980-1985
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 1984 Kawasaki KZ 750 LTD
- 1983 Kawasaki KZ 750 Spectre
- 1983 Kawasaki KZ 750 LTD
- 1983 Kawasaki KZ 750 F1 LTD (4 cyl)
- 1983 Kawasaki KZ 750
- 1983 Kawasaki KZ 650
- 1982 Kawasaki KZ 750 LTD
- 1982 Kawasaki KZ 750
- 1982 Kawasaki KZ 650
- 1981 Kawasaki KZ 750 LTD
- 1981 Kawasaki KZ 750
- 1981 Kawasaki KZ 650
- 1980 Kawasaki KZ 750 LTD
- 1980 Kawasaki KZ 750 E 4 Cylindre Std 4
Interior diameter : 34 mm
Exterior diameter : 93 mm
Thickness : 17 mm
Length of wires stator to grommet : 70 mm
Length of wires grommet to plug : 205 mm
Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3
Wire to wire resistance :
Alternator : Yellow between each Yellow = 0.4 ohms +/-20%
Alternator : Yellow to Ground = O.L. ON DISPLAY
Before installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.
Brand new aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Connector included
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.