Stator for Arctic Cat CRF Crossfire 700 | F6 / F7 Firecat | M6 600 | Mountain Cat 600 2005-2006 | 3007-018 / 3006-943

$USD 229.00
Availability: In stock
SKU
RM01274

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

3007-018
3006-943

Dimensions :
Interior diameter : 47 mm
Exterior diameter : 115 mm
Thickness : 20 mm
Length of wires stator to plug : 500 mm

Other specifications :
Number of wires : 9
Number of plugs : 1
Number of pins : 9

Wire to wire resistance :
Alternator 1 : Yellow between each Yellow = 0.4 ohms +-20%
Alternator 2 : White/Blue between each White/Blue = 17.2 ohms +-20%
Pickup : Orange between each Orange= 2 ohms +-20%
Source 1 : Green to Brown = 10 ohms +-20%
Source 2 : Green to Black = 10 ohms +-20%

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Please note: Your model may not need the brown wire. Please remove it if this is the case for your machine

Brand new stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • All products shipped are tested

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Please note: Your model may not need the brown wire. Please remove it if this is the case for your machine

Write Your Own Review
You're reviewing:Stator for Arctic Cat CRF Crossfire 700 | F6 / F7 Firecat | M6 600 | Mountain Cat 600 2005-2006 | 3007-018 / 3006-943
Your Rating
Customers Also Viewed
Currently there is no product to display.