Stator for Arctic Cat King Cat Mountain Cat ZR 900 Mountain Cat ZR ZL 800 ZR 440 Sno Pro 2000-2005

• 2005 Arctic Cat ZR 900 Sno Pro Carb L/C
• 2005 Arctic Cat ZR 900 Carb L/C
• 2005 Arctic Cat King Cat 900 Carb L/C
• 2004 Arctic Cat ZR 900 Sno Pro Carb L/C
• 2004 Arctic Cat ZR 900 Carb L/C
• 2004 Arctic Cat Mountain Cat 900 Carb L/C
• 2004 Arctic Cat King Cat 900 Carb L/C
• 2003 Arctic Cat ZR 900 Sno Pro Carb L/C
• 2003 Arctic Cat ZR 900 Carb L/C
• 2003 Arctic Cat Mountain Cat 900 Carb L/C
• 2002 Arctic Cat ZR 800 Carb L/C
• 2002 Arctic Cat Mountain Cat 800 Carb L/C
• 2001 Arctic Cat ZR 800 Carb L/C
• 2001 Arctic Cat ZR 440 Sno Pro Carb L/C
• 2001 Arctic Cat ZL 800 Carb L/C
• 2001 Arctic Cat Mountain Cat 800 Carb L/C
• 2000 Arctic Cat ZR 440 Sno Pro Carb L/C

Dimensions :
Interior diameter : 37 mm
Exterior diameter : 98 mm
Thickness : 20 mm
Length of wires stator to plug : 160 mm

Other specifications :
Number of wires : 9
Number of plugs : 6
Number of pins : 10

Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4 ohms +-20%

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".