Stator for Triumph Speed Triple 1050 | Speed Triple 1050 R | Sprint GT 1050 | Sprint ST 1050 | Tiger 1050 | 1994-2020
Please note: that some Triumph models have multiple stator for some models. Please refer to the note below to make sure you have the right part.
Speed triple R from 2011 to 2017 : This part will only fit on Speed triple R with a VIN LOWER than 735336. For models with a higher VIN than 735337, refer to OEM T1300118.
Sprint ST 2019 to 2020 This part fits vehicles with VIN 208167 and up. For vehicles with VIN up to 139276, refer to part # RM01348 and for vehicles with VIN from 139277 to 208166, refer to part # RM01387S.
Speed Triple 1994 to 2018 This part will only fit Speed Triple with a VIN BETWEEN 210445 and 461331 and an engine number HIGHER than 356143 or a VIN BETWEEN 461332 and 735437. If your vehicle has a VIN between 141872 and 210444 and has a engine number higher than 183487 or a VIN between 210445 and 461331 and an engine number lower than 356142, refer to RM01391S. If your vehicle has a VIN between 141872 and 210444 and with an engine number lower than 183486, refer to RM01387S. If your vehicle has a VIN lower than 141871, refer to RM01348.
Speed Triple 1050 2005-2010 : compare the dimension of your original product with the dimension of our product before buying.
The dimensions for this stator are :
Exterior diameter : 115 mm
Interior diameter : 42 mm
Thickness : 22 mm
This stator will fit engine serial number 356143 and up. The other possible product is the RM01391S.
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2020 Triumph Sprint ST 1050
- 2020 Triumph Sprint GT 1050
- 2019 Triumph Sprint ST 1050
- 2019 Triumph Sprint GT 1050
- 2018 Triumph Tiger 1050
- 2018 Triumph Sprint GT 1050
- 2018 Triumph Speed Triple 1050
- 2017 Triumph Tiger 1050
- 2017 Triumph Sprint GT 1050
- 2017 Triumph Speed Triple 1050 R
- 2017 Triumph Speed Triple 1050
- 2016 Triumph Tiger 1050
- 2016 Triumph Sprint GT 1050
- 2016 Triumph Speed Triple 1050 R
- 2016 Triumph Speed Triple 1050
- 2015 Triumph Tiger 1050
- 2015 Triumph Sprint GT 1050
- 2015 Triumph Speed Triple 1050 R
- 2015 Triumph Speed Triple 1050
- 2014 Triumph Tiger 1050
- 2014 Triumph Sprint GT 1050
- 2014 Triumph Speed Triple 1050 R
- 2014 Triumph Speed Triple 1050
- 2013 Triumph Tiger 1050
- 2013 Triumph Sprint GT 1050
- 2013 Triumph Speed Triple 1050 R
- 2013 Triumph Speed Triple 1050
- 2012 Triumph Tiger 1050
- 2012 Triumph Sprint ST 1050
- 2012 Triumph Sprint GT 1050
- 2012 Triumph Speed Triple 1050 R
- 2012 Triumph Speed Triple 1050
- 2011 Triumph Tiger 1050
- 2011 Triumph Sprint ST 1050
- 2011 Triumph Sprint GT 1050
- 2011 Triumph Speed Triple 1050 R
- 2011 Triumph Speed Triple 1050
- 2010 Triumph Tiger 1050
- 2010 Triumph Sprint ST 1050
- 2010 Triumph Sprint GT 1050
- 2010 Triumph Speed Triple 1050
- 2009 Triumph Tiger 1050
- 2009 Triumph Sprint ST 1050
- 2009 Triumph Speed Triple 1050
- 2008 Triumph Tiger 1050
- 2008 Triumph Sprint ST 1050
- 2008 Triumph Speed Triple 1050
- 2007 Triumph Tiger 1050
- 2007 Triumph Sprint ST 1050
- 2007 Triumph Speed Triple 1050
- 2006 Triumph Tiger 1050
- 2006 Triumph Sprint ST 1050
- 2006 Triumph Speed Triple 1050
- 2005 Triumph Sprint ST 1050
- 2005 Triumph Speed Triple 1050
- 2004 Triumph Speed Triple 1050
- 2003 Triumph Speed Triple 1050
- 2002 Triumph Speed Triple 1050
- 2001 Triumph Speed Triple 1050
- 2000 Triumph Speed Triple 1050
- 1999 Triumph Speed Triple 1050
- 1998 Triumph Speed Triple 1050
- 1997 Triumph Speed Triple 1050
- 1996 Triumph Speed Triple 1050
- 1995 Triumph Speed Triple 1050
- 1994 Triumph Speed Triple 1050
T1300509
Dimensions :
Interior diameter : 42 mm
Exterior diameter : 115 mm
Width : 22 mm
Other specifications :
Number of wires : 3
Number of plugs : 1
Number of terminals : 3
Harness length Stator to grommet : 110 mm
Harness length grommet to plug : 600 mm
Wire to wire resistance :
Alternator : Black between each Black = 0.5 ohms +/- 20%
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new generator stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Connector included
- Rubber grommet included
- All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.