Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Qty:

Share This Product:

Vehicle Fitment

2018 Honda CBR 500 R
2018 Honda CB 500 X
2018 Honda CB 500 F
2017 Honda CBR 500 R
2017 Honda CB 500 X
2017 Honda CB 500 F
2016 Honda CBR 500 R
2016 Honda CB 500 X
2016 Honda CB 500 F
2015 Honda CBR 500 R
2015 Honda CB 500 X
2015 Honda CB 500 F
2014 Honda CBR 500 R
2014 Honda CB 500 X
2014 Honda CB 500 F
2013 Honda CBR 500 R
2013 Honda CB 500 X
2013 Honda CB 500 F

Interchange Part No

31120-MJW-J01
31120-MGZ-J01

Specifications

Dimensions :
Interior diameter : 54 mm
Exterior diameter : 125 mm
Thickness : 25 mm
Length of wires stator to grommet : 80 mm
Length of wires grommet to plug : 50 mm
Length of pickup coil's wire to grommet : 35 mm

Other specifications :
Number of wires : 5
Number of plugs : 2
Number of pins : 5

Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4 ohms +-20%
Pickup : Yellow to White = 120 ohms +-20%

Installation

Before installing your new stator

Check the AC output of the stator
Replace any burned or corroded connectors on stator and regulator rectifier
Check and repair any melted wiring
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010''.

Details