Ignition Stator for Kawasaki KLX 250 1994-1996 / KLX 300 1997-2007 | OEM Repl.# 21003-1274 KLX250 KLX300

• 2007 Kawasaki KLX 300 R
• 2006 Kawasaki KLX 300 R
• 2005 Kawasaki KLX 300 R
• 2004 Kawasaki KLX 300 R
• 2003 Kawasaki KLX 300 R
• 2002 Kawasaki KLX 300 R
• 2001 Kawasaki KLX 300 R
• 2000 Kawasaki KLX 300 R
• 1999 Kawasaki KLX 300 R
• 1998 Kawasaki KLX 300 R
• 1997 Kawasaki KLX 300 R
• 1996 Kawasaki KLX 250
• 1995 Kawasaki KLX 250
• 1994 Kawasaki KLX 250

Dimensions :
Interior diameter : 35 mm
Exterior diameter : 93 mm
Thickness : 18 mm
Length of wires stator to grommet : 130 mm
Length of wires grommet to plug : 700 mm
Length of pickup coil's wire to grommet : 60 mm

Other specifications :
Number of wires : 6
Number of plugs : 2
Number of pins : 6

Wire to wire resistance :
Alternator : Yellow to Yellow = 0.9 ohms +-20%
Source coil : Red to Black = 160 ohms +/-20%
Pickup : Green/White to White = 250 ohms +-20%

Before installing your new stator

• Check the AC output of the stator
• Replace any burned or corroded connectors on stator and regulator rectifier
• Check and repair any melted wiring
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".