Mosfet Regulator for Honda VTX 1300 C / VTX 1300 R / VTX 1300 S / VTX 1300 T 2003-2009

$USD 99.00
Availability: In stock
SKU
RMS020-102332

Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

31600-MEA-741
31600-MEA-670

Dimensions:
Width: 90 mm
Length: 90 mm
Height: 30 mm
Wires length: 600 mm
Fixation holes center to center: 75 mm

Other specifications:
Number of plugs: 2
Number of pins: 7
Number of wires: 7

Before installing your new Voltage Regulator Rectifier:

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator rectifier.
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors.

Brand new aftermarket Mosfet Voltage Regulator Rectifier

  • Direct replacement to your original unit.
  • Plug-and-play, direct fit, easy installation.
  • No assembly required
  • Higher grade of electric components.
  • Improved heat sink and charging capabilities
  • The quality exceeds the OEM equipment
  • All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted, corroded, defective and a major cause for repetitive electrical issues.

All item pictures are accurate, if in doubt, do not hesitate and compare our item to your original part.

Write Your Own Review
You're reviewing:Mosfet Regulator for Honda VTX 1300 C / VTX 1300 R / VTX 1300 S / VTX 1300 T 2003-2009
Your Rating
Customers Also Viewed
Currently there is no product to display.