Generator Stator for Polaris Sawtooth 200 / Phoenix 200 2005-2020
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2020 Polaris Phoenix 200
- 2019 Polaris Phoenix 200
- 2018 Polaris Phoenix 200
- 2017 Polaris Phoenix 200
- 2016 Polaris Phoenix 200
- 2015 Polaris Phoenix 200
- 2014 Polaris Phoenix 200
- 2013 Polaris Phoenix 200
- 2012 Polaris Phoenix 200
- 2011 Polaris Phoenix 200
- 2010 Polaris Phoenix 200
- 2009 Polaris Phoenix 200
- 2008 Polaris Phoenix 200
- 2007 Polaris Sawtooth 200
- 2007 Polaris Phoenix 200
- 2006 Polaris Sawtooth 200
- 2006 Polaris Phoenix 200
- 2005 Polaris Phoenix 200
Interior diameter : 35mm
Exterior diameter : 95mm
Thickness : 15mm
Length of wires stator to grommet : 110mm
Length of wires grommet to plug : 560mm
Length of pickup coil's wire to grommet : 90mm
Other specifications :
Number of wires : 5
Number of plugs : 1
Number of pins : 5
Wire to wire resistance :
Alternator : Yellow between each Yellow = 0.4ohms +/-20%
Pickup : Blue/White to Green (Ground) = 150ohms +/-20%
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.
Brand new aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.