High Output Stator 200 W for Honda XR 400 R XR 650 R 1996-2007

$USD 159.00
Availability: Out of stock
SKU
RM01023

If you would like to use this stator to add a battery to your bike, you will need a single phase voltage regulator rectifier.

We recommend our RM03900 regulator.



Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

31120-KCY-671
31120-MBN-671

Dimensions:
Interior diameter: 53 mm
Exterior diameter: 115 mm
Thickness: 14 mm
Length of wires stator to grommet : 50 mm
Length of wires grommet to plug : 600 mm
Length of pickup coil's wire to grommet : 85 mm

Other specifications:
Number of wires : 8
Number of plugs : 7
Number of pins: 8

Wire to wire resistance:
Alternator : Green to White = 0.2 ohms+/-20%
Pick up : Blue/Yellow to Green/Red = 250 ohms+/-20%
Source : Black/Red to Brown = 100 ohms+/-20%

Brand new High Output 200 W aftermarket stator

Watch Jake TheGardenSnake install this stator on his Honda XR650R on Youtube >

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • All products shipped are tested

For a limited time we are including, FREE OF CHARGE, the Tympanum AC regulator required to run the extra wattage supplied from our 200 W stator.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:High Output Stator 200 W for Honda XR 400 R XR 650 R 1996-2007
Your Rating
Customers Also Viewed
Currently there is no product to display.