Pickup Coil for Polaris Big Boss Xplorer 400 L Sportsman 400 XCR XLT 580 600 1993-2002 Husqvarna TE SM 610 630 2008 2011

$USD 34.00
Availability: In stock
SKU
RM00115
3084763
3084511
8000A6767
8000A6778
Dimensions:
Height: 22mm
Length: 22mm
Width: 18mm
Bracket center to center: 30 mm
Length of wires: 400mm

Other Specifications:
Number of wires : 2
Number of terminals: 2

Wire to Wire Resistance:
Red/White to White = 130 ohms+/-20%
Not following these instructions may result in damaging the part or other components on your vehicle.
  • By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
  • Insulate your solders with heat shrink.
  • Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
  • Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010メメ.
  • If no spark or erratic spark, switch the wires at the plug.

Brand new pick up coil 130 ohms

  • We offer a brand new pickup/pulser coil for you to repair your stator.
  • Often unavailable from the OEM manufacturer
  • All products shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Pickup Coil for Polaris Big Boss Xplorer 400 L Sportsman 400 XCR XLT 580 600 1993-2002 Husqvarna TE SM 610 630 2008 2011
Your Rating
Customers Also Viewed
Currently there is no product to display.