Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Qty:

Share This Product:

Vehicle Fitment

2014 Honda TRX 400 X
2013 Honda TRX 400 X
2012 Honda TRX 400 X
2009 Honda TRX 400 X
2008 Honda TRX 400 EX Sportrax
2007 Honda TRX 400 EX Sportrax
2006 Honda TRX 400 EX Sportrax
2005 Honda TRX 400 EX Sportrax
2004 Honda TRX 400 EX Sportrax
2003 Honda TRX 400 EX Sportrax
2002 Honda TRX 400 EX Sportrax
2001 Honda TRX 400 EX Sportrax
2000 Honda TRX 400 EX Sportrax
1999 Honda TRX 400 EX Sportrax

Interchange Part No

31120-HN1-000
31120-HN1-003
31120-HN1-A40
31120-HN1-A41

Specifications

Dimensions :
Interior diameter: 53 mm
Exterior diameter: 115 mm
Thickness: 14 mm
Length of wires stator to grommet: 90 mm
Length of wires grommet to plug: 560 mm
Length of pickup coil's wire to grommet: 250 mm

Other specifications :
Number of wires: 6
Number of plugs: 2
Number of terminals: 6
Alternator: Green to White = 0.4 ohms +/-20%
Pick up: Blue/Yellow to Green/Red = 230 ohms +/-20%
Source: Black/Red to Brown = 90 ohms +/-20%

Installation

Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Details