Stator for Aprilla Rally / Scarabeo 50 | ETon DXL RXL 70 90 | Polaris Sportsman / Predator / Scrambler 50 90 1990-2007
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- All Year E-Ton TXL 50 Thunder
- 2007 E-Ton RXL 90 Viper
- 2007 E-Ton RXL 70 Viper
- 2006 Polaris Sportsman 90
- 2006 Polaris Predator 90
- 2006 Polaris Predator 50
- 2006 E-Ton RXL 90 Viper
- 2006 E-Ton RXL 70 Viper
- 2006 Can-Am DS 50 2-Stroke
- 2006 Aprilia Scarabeo 50 2T
- 2005 Polaris Sportsman 90
- 2005 Polaris Predator 90
- 2005 Polaris Predator 50
- 2005 E-Ton RXL 90 Viper
- 2005 E-Ton RXL 70 Viper
- 2005 E-Ton DXL 90 Sierra
- 2005 Can-Am DS 50 2-Stroke
- 2005 Aprilia Scarabeo 50 2T
- 2004 Polaris Sportsman 90
- 2004 Polaris Predator 90
- 2004 Polaris Predator 50
- 2004 E-Ton RXL 70 Viper
- 2004 E-Ton RXL 50 Viper
- 2004 E-Ton DXL 90 Sierra
- 2004 Can-Am DS 50 2-Stroke
- 2004 Aprilia Scarabeo 50 2T
- 2004 Aprilia Rally 50
- 2003 Polaris Sportsman 90
- 2003 Polaris Scrambler 90
- 2003 Polaris Scrambler 50
- 2003 Polaris Predator 90
- 2003 E-Ton RXL 90 Viper
- 2003 E-Ton RXL 50 Viper
- 2003 E-Ton DXL 90 Sierra
- 2003 Can-Am DS 50 2-Stroke
- 2003 Aprilia Scarabeo 50 2T
- 2003 Aprilia Rally 50
- 2002 Polaris Sportsman 90
- 2002 Polaris Scrambler 90 X
- 2002 Polaris Scrambler 90
- 2002 Polaris Scrambler 50
- 2002 E-Ton RXL 90 Viper
- 2002 E-Ton RXL 50 Viper
- 2002 E-Ton DXL 90 Sierra
- 2002 Can-Am DS 50 2-Stroke
- 2002 Aprilia Scarabeo 50 2T
- 2002 Aprilia Rally 50
- 2001 Yamaha Zuma II 50
- 2001 Yamaha CY 50 Jog
- 2001 Polaris Sportsman 90
- 2001 Polaris Scrambler 90
- 2001 Polaris Scrambler 50
- 2001 E-Ton TXL 90 Thunder
- 2001 E-Ton DXL 90 Sierra
- 2001 E-Ton AXL 50 Lightning
- 2001 Aprilia Scarabeo 50 2T
- 2001 Aprilia Rally 50
- 2000 Yamaha CY 50 Jog
- 2000 E-Ton TXL 90 Thunder
- 2000 E-Ton DXL 90 Sierra
- 2000 E-Ton AXL 50 Lightning
- 2000 Aprilia Scarabeo 50 2T
- 2000 Aprilia SR 50 Ditech
- 2000 Aprilia Rally 50
- 1999 Yamaha Zuma II 50
- 1999 Yamaha CY 50 Jog
- 1999 Aprilia SR 50 Ditech
- 1999 Aprilia Rally 50
- 1998 Yamaha Zuma II 50
- 1998 Yamaha CY 50 Jog
- 1998 Aprilia SR 50 Ditech
- 1998 Aprilia Rally 50
- 1997 Yamaha Zuma II 50
- 1997 Yamaha CY 50 Jog
- 1997 Aprilia SR 50 Ditech
- 1997 Aprilia Rally 50
- 1996 Yamaha CY 50 Jog
- 1996 Aprilia Rally 50
- 1995 Yamaha CY 50 Jog
- 1995 Aprilia Rally 50
- 1994 Yamaha CY 50 Jog
- 1993 Yamaha CY 50 Jog
- 1992 Yamaha CY 50 Jog
- 1990 Yamaha Zuma II 50
0450522
0450521
01-ETON-50-70-90
AP8206462
AP8212701
0450523
0450998
0451000
3KJ-85560-00-00
3ES-85560-01-00
A31100116000
Interior diameter : 79 mm
Exterior diameter : 27 mm
Thickness : 13 mm
Length of wires stator to grommet : 79 mm
Length of wires grommet to plug : 200 mm
Length of pickup coil's wire to grommet : 100 mm
Other specifications :
Number of wires : 5
Number of plugs : 3
Number of pins : 5
Wire to wire resistance :
Alternator : Red to White = 0.4 ohms +/-20%
Pickup : Pink to Black = 500 ohms +/-20%
Source : Black/Red to Black = 300 ohms +/-20%
Before installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original. All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound.
Our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Brand new 7-coil stator with 5 wires for two stroke engines
- 3-pin plug , 2 loose wires
- 2 bolt holes, 103mm bolt hole spacing.
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- Back Plate included
- All product shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".