Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Qty:

Share This Product:

Vehicle Fitment

1984 Kawasaki KZ 750 LTD
1983 Kawasaki KZ 750 Spectre
1983 Kawasaki KZ 750 LTD
1983 Kawasaki KZ 750 F1 LTD (4 cyl)
1983 Kawasaki KZ 750
1983 Kawasaki KZ 650
1982 Kawasaki KZ 750 LTD
1982 Kawasaki KZ 750
1982 Kawasaki KZ 650
1981 Kawasaki KZ 750 LTD
1981 Kawasaki KZ 750
1981 Kawasaki KZ 650
1980 Kawasaki KZ 750 LTD
1980 Kawasaki KZ 750 E 4 Cylindre Std 4

Interchange Part No

21003-1026
21003-1083

Specifications

Dimensions :
Interior diameter : 34 mm
Exterior diameter : 93 mm
Thickness : 17 mm
Length of wires stator to grommet : 70 mm
Length of wires grommet to plug : 205 mm

Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3

Wire to wire resistance :
Alternator : Yellow between each Yellow = 0.4 ohms +/-20%
Alternator : Yellow to Ground = O.L. ON DISPLAY

Installation

Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Details