Stator for Yamaha 600 700 cc Carb L/C Mountain Max SX Venture V-Max 1997-2001 | OEM# 8CH-85510-02-00 / 8CH-85510-00-00

• 2001 Yamaha Venture 700
• 2001 Yamaha Venture 600
• 2001 Yamaha V-Max 600
• 2001 Yamaha SX 700 R
• 2001 Yamaha SX 600 R
• 2001 Yamaha Mountain Max 700
• 2001 Yamaha Mountain Max 600
• 2000 Yamaha Venture 700
• 2000 Yamaha Venture 600
• 2000 Yamaha V-Max 700 Deluxe
• 2000 Yamaha V-Max 700
• 2000 Yamaha V-Max 600
• 2000 Yamaha SX 700 R
• 2000 Yamaha SX 600 R
• 2000 Yamaha Mountain Max 700
• 2000 Yamaha Mountain Max 600
• 1999 Yamaha Venture 700
• 1999 Yamaha Venture 600
• 1999 Yamaha V-Max 700 SX
• 1999 Yamaha V-Max 700 ER
• 1999 Yamaha V-Max 700
• 1999 Yamaha V-Max 600 SX
• 1999 Yamaha V-Max 600 ER
• 1999 Yamaha Mountain Max 700
• 1998 Yamaha V-Max 700 SX
• 1998 Yamaha V-Max 700
• 1998 Yamaha Mountain Max 700
• 1997 Yamaha V-Max 700 SX
• 1997 Yamaha Mountain Max 700
• 1997 Yamaha Mountain Max 600

Dimensions :
Interior diameter : 42 mm
Exterior diameter : 103 mm
Thickness : 15 mm
Length of wires stator to grommet : 95 mm
Length of wires grommet to plug : 160 mm
Length of pickup coil's wire to grommet : 140 mm

Other specifications :
Number of wires : 6
Number of plugs : 2
Number of pins : 6

Wire to wire resistance :
Alternator : Yellow to White = 0.04 ohms +/- 20%
Pickup : Whte to White/Red = 225 ohms +/- 20%
Source 1 : Black to Brown/Red = 124 ohms +/- 20%
Source 2 : Brown to Black/Red = 443 ohms +/- 20%

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
For the pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.