Generator Stator for Polaris ATP 500 / Hawkeye 400 / Ranger 400 425 500 / Sportsman 400 450 500 2004-2014 | 3089546
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2014 Polaris Ranger 400 Carb
- 2014 Polaris Hawkeye 400 HO
- 2013 Polaris Sportsman 500 Touring
- 2013 Polaris Sportsman 500 HO Forest
- 2013 Polaris Ranger 400 Carb
- 2013 Polaris Hawkeye 400 HO
- 2012 Polaris Sportsman 500 HO Forest
- 2012 Polaris Sportsman 500 HO
- 2012 Polaris Scrambler 500 4x4 Intl
- 2012 Polaris Scrambler 500 4x4
- 2012 Polaris Ranger 400 Carb
- 2012 Polaris Hawkeye 400 HO
- 2011 Polaris Scrambler 500 4x4 Intl
- 2011 Polaris Scrambler 500 4x4
- 2011 Polaris Ranger 400 Carb
- 2010 Polaris Scrambler 500 4x4 Intl
- 2010 Polaris Scrambler 500 4x4
- 2010 Polaris Ranger 400 Carb
- 2009 Polaris Sportsman 500 HO Carb
- 2009 Polaris Scrambler 500 4x4
- 2009 Polaris Ranger 500 EFI 4x4
- 2009 Polaris Ranger 500 Carb
- 2008 Polaris Sportsman 500 HO Carb
- 2008 Polaris Sportsman 500 6x6
- 2008 Polaris Scrambler 500 4x4
- 2008 Polaris Scrambler 500 2x4 Intl
- 2008 Polaris Ranger 500 Carb
- 2007 Polaris Sportsman 500 6x6
- 2007 Polaris Sportsman 450
- 2007 Polaris Scrambler 500 4x4
- 2007 Polaris Scrambler 500 2x4 Intl
- 2007 Polaris Ranger 500 Carb
- 2006 Polaris Sportsman 500 HO EFI
- 2006 Polaris Sportsman 500 HO Carb
- 2006 Polaris Sportsman 450
- 2006 Polaris Scrambler 500 4x4
- 2006 Polaris Ranger 500 Carb
- 2005 Polaris Sportsman 500 HO
- 2005 Polaris Sportsman 500 4x4
- 2005 Polaris Sportsman 400 F/C Carb
- 2005 Polaris Scrambler 500 4x4
- 2005 Polaris Ranger 500 Carb
- 2005 Polaris ATP 500
- 2004 Polaris Sportsman 500 HO
- 2004 Polaris Sportsman 500 4x4
- 2004 Polaris Sportsman 400 4x4 F/C Carb
- 2004 Polaris Scrambler 500 4x4
- 2004 Polaris Ranger 500 6x6
- 2004 Polaris Ranger 500 4x4
- 2004 Polaris Ranger 425
3089546
3089965
3089403
3089579
Dimensions:
Interior diameter: 42 mm
Exterior diameter: 108 mm
Thickness: 19 mm
Other specifications:
Number of wires: 11
Number of plugs: 6
Number of pins: 9
Harness length Stator to grommet: 100 mm
Harness length grommet to plug: 1000 mm
Pickup coil`s wire length to grommet: 150 mm
Wire to wire resistance:
Alternator: Yellow between each yellow = 0.4 ohms +/-20%
Pickup: White to white/red = 100 ohms +/-20%
Before installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
The stator to regulator must be re-installed, after that our stator becomes plug and play.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.
Some applications will need you to re-install your old stator to regulator connector to our yellow wires, to become plug and play.
Brand new aftermarket stator
- You must re-install the stator to regulator connector
- Higher grade of electric components.
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.