Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Qty:

Share This Product:

Vehicle Fitment

1994 Sea-doo 720 SPX
1994 Sea-doo 650 XPI
1994 Sea-doo 580 SPI
1994 Sea-doo 580 SP
1994 Sea-doo 580 GTX
1994 Sea-doo 580 GTS
1993 Sea-doo 720 SPX
1993 Sea-doo 580 SPI
1993 Sea-doo 580 SP
1993 Sea-doo 580 GTX
1993 Sea-doo 580 GTS
1992 Sea-doo 650 XP
1992 Sea-doo 580 SP
1992 Sea-doo 580 GTX
1992 Sea-doo 580 GTS

Interchange Part No

290995103
290995109
420995109

Specifications

Dimensions :
Interior diameter : 40 mm
Exterior diameter : 107 mm
Thickness : 25 mm
Length of wires stator to plug : 240 mm

Other specifications :
Number of wires : 4
Number of plugs : 4
Number of pins : 4

Wire to wire resistance :
Alternator : Yellow to Yellow/Black = 0.4 ohms +/-20%
Source : Black to Black/Red = 60 ohms +/-20%

Installation

Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Details