Stator for Yamaha VK 540 Carb F/C 1993-2005 | OEM Repl.# 8AT-85560-10-00 / 8AT-85560-00-00

$USD 229.00
Availability: In stock
SKU
RM01467

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.



This stator assembly uses the following coils:


  • Charge Coil: 81L-85520-M0-00

  • Lighting Coils: 81L-81313-M0-00 & 81L-81314-M0-00

  • Pickup/Pulsar Coil: 8R4-85580-M0-00

8AT-85560-10-00
8AT-85560-00-00
Dimensions :
Interior diameter : 35mm
Exterior diameter : 100mm
Thickness : 50mm
Length of wires stator to grommet : 15mm
Length of wires grommet to plug : 140mm
Length of pickup coil's wire to grommet : 20mm

Other specifications :
Number of wires : 6
Number of plugs : 2
Number of pins : 6

Wire to wire resistance :
Alternator : White to Yellow = 0.4 ohms +/-20%
Pickup : White/Red to Black = 20 ohms +/-20%
Source 1 : Red to Ground = 1.0 ohms +/-20% Source 2 : Red to Brown = 280 ohms +/-20%

Before installing your new stator

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Brand new aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Back Plate included
  • All products shipped are tested

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Stator for Yamaha VK 540 Carb F/C 1993-2005 | OEM Repl.# 8AT-85560-10-00 / 8AT-85560-00-00
Your Rating
Customers Also Viewed
Currently there is no product to display.