Flywheel Rotor for Ski-Doo MX Z / MX ZX / Summit 500 600 700 800 cc 2003-2007
$USD 99.00
Availability: In stock
SKU
RM11511
Please note:
- This flywheel fits the STD models ONLY.
- The STD and RER / Trail models of the Ski-Doo 500/600/700/800cc do not use the same stator and flywheel.
- For the RER / Trailmodels, please use flywheel RM11510 or flywheel & puller kit RMS900-103564.
- You can determine the correct flywheel by measuring the length of the lump (timing trigger ridge) on outside edge of the flywheel.
- This STD version has a 25 mm / 1" long trigger.
- The RER / Trail version (RM11510) has a 60 mm / 2.5 " long trigger.
- All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
- 2007 Ski-doo MX ZX 440 Racing Carb L/C
- 2004 Ski-doo Summit 800 HO Carb L/C
- 2004 Ski-doo MX ZX 600 HO Carb L/C
- 2004 Ski-doo MX Z 600 HO Trail Carb L/C
- 2004 Ski-doo MX Z 600 HO Adrenaline Carb L/C
- 2004 Ski-doo MX Z 500 SS Trail Carb L/C
- 2003 Ski-doo Summit 800 HO X Carb L/C
- 2003 Ski-doo Summit 800 HO Highmark X Carb L/C
- 2003 Ski-doo Summit 800 HO Highmark Carb L/C
- 2003 Ski-doo Summit 800 HO Adrenaline Carb L/C
- 2003 Ski-doo Summit 700 X Carb L/C
- 2003 Ski-doo Summit 700 Highmark Carb L/C
- 2003 Ski-doo Summit 700 Carb L/C
- 2003 Ski-doo Summit 700 Adrenaline Carb L/C
- 2003 Ski-doo Summit 600 HO Adrenaline Carb L/C
- 2003 Ski-doo MX ZX 800 Carb L/C
- 2003 Ski-doo MX ZX 600 HO Carb L/C
- 2003 Ski-doo MX Z 800 Sport Carb L/C
- 2003 Ski-doo MX Z 800 Renegade Carb L/C
- 2003 Ski-doo MX Z 800 Adrenaline Carb L/C
- 2003 Ski-doo MX Z 700 Adrenaline Carb L/C
- 2003 Ski-doo MX Z 600 Trail Carb L/C
- 2003 Ski-doo MX Z 600 HO Trail Carb L/C
- 2003 Ski-doo MX Z 600 HO Sport Carb L/C
- 2003 Ski-doo MX Z 600 HO Renegade Carb L/C
- 2003 Ski-doo MX Z 600 HO Adrenaline Carb L/C
- 2003 Ski-doo MX Z 600 Carb L/C
- 2003 Ski-doo MX Z 500 Trail Carb L/C
- 2003 Ski-doo MX Z 500 Adrenaline Carb L/C
410922953
Dimensions:
Exterior Diameter: 128 mm
Interior Diameter: 104 mm
Interior Diameter Center Housing: 27 mm
Exterior Diameter Center Housing: 24 mm
Thickness (exterior): 53 mm
Thickness (interior): 38 mm
Long Lump (timing trigger ridge): 25 mm
Before attempting to start your Ski-Doo, adjusting the air gap is necessary. Rotate the flywheel so the raised node is lined up with the pick up/pulsar coil and adjust as close as possible but no less than 0.010’’.
Our flywheel is manufactured to OEM specs and is covered by a warranty that brings you peace of mind.
Features :
- Heavy duty flywheel rotor with stainless steel capping & high strength epoxy that completely prevents magnet failure.
- All parts are tested through an extensive quality control process to ensure correct operation.
Write Your Own Review