Voltage Regulator for Kawasaki KZ 1000 1100 | GPZ ZX 750 / 1100 1981-2005 | 21066-1018 21066-0798
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2005 Kawasaki KZ 1000
- 2003 Kawasaki KZ 1000
- 2002 Kawasaki KZ 1000
- 2001 Kawasaki KZ 1000
- 2000 Kawasaki KZ 1000
- 1999 Kawasaki KZ 1000
- 1998 Kawasaki KZ 1000
- 1997 Kawasaki KZ 1000
- 1996 Kawasaki KZ 1000
- 1995 Kawasaki KZ 1000
- 1994 Kawasaki KZ 1000
- 1993 Kawasaki KZ 1000
- 1992 Kawasaki KZ 1000
- 1991 Kawasaki KZ 1000
- 1990 Kawasaki KZ 1000
- 1989 Kawasaki KZ 1000
- 1988 Kawasaki KZ 1000
- 1987 Kawasaki KZ 1000
- 1986 Kawasaki KZ 1000
- 1985 Kawasaki KZ 1000
- 1985 Kawasaki GPz 750 ZX750
- 1984 Kawasaki KZ 1000
- 1984 Kawasaki GPz 750 ZX750
- 1984 Kawasaki GPZ 1100 ZX1100
- 1983 Kawasaki KZ 1100
- 1983 Kawasaki KZ 1000
- 1983 Kawasaki GPz 750 ZX750
- 1983 Kawasaki GPZ 1100 ZX1100
- 1982 Kawasaki KZ 1100 GPZ
- 1982 Kawasaki KZ 1100
- 1982 Kawasaki KZ 1000
- 1982 Kawasaki GPz 750 ZX750
- 1981 Kawasaki KZ 1100
- 1981 Kawasaki KZ 1000
21066-0798
Dimensions:
Width: 80mm
Length: 90mm
Height: 28mm
Wires length: 220mm
Fixation holes center to center: 65mm
Other specifications:
Number of plugs: 1
Number of pins: 5
Number of wires: 5
Minimum Charging Voltage: 14.5V +/- 0.5V
Maximum Charging Current: 50A/500W
Open Circuit Voltage: <15V
Operation Temperature: -20⁰ to 85⁰
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.
Brand new voltage regulator rectifier
- Direct replacement to your original unit.
- Plug-and-play, direct fit, easy installation.
- No assembly required
- The Quality exceeds the OEM equipment
- Improved heat sink and charging capabilities
- Higher grade of electric components.
- All products shipped are tested
*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.