Voltage Regulator Rectifier for Honda GL 1100 Goldwing | GL 1200 Goldwing Aspencade 1975-1987 | 31600-463-008
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 1987 Honda GL 1200 I
- 1987 Honda GL 1200 Goldwing Interstate
- 1987 Honda GL 1200 Goldwing Aspencade
- 1987 Honda GL 1200 A
- 1986 Honda GL 1200 I
- 1986 Honda GL 1200 Goldwing Interstate
- 1986 Honda GL 1200 Goldwing Aspencade
- 1986 Honda GL 1200 A
- 1985 Honda GL 1200 I
- 1985 Honda GL 1200 Goldwing Interstate
- 1985 Honda GL 1200 Goldwing Aspencade
- 1985 Honda GL 1200 A
- 1984 Honda GL 1200 I
- 1984 Honda GL 1200 Goldwing Interstate
- 1984 Honda GL 1200 Goldwing Aspencade
- 1984 Honda GL 1200 A
- 1983 Honda GL 1100 Goldwing Interstate
- 1983 Honda GL 1100 Goldwing Aspencade
- 1983 Honda GL 1100 Goldwing
- 1982 Honda GL 1100 Goldwing Interstate
- 1982 Honda GL 1100 Goldwing Aspencade
- 1982 Honda GL 1100 Goldwing
- 1981 Honda GL 1100 Goldwing Interstate
- 1981 Honda GL 1100 Goldwing
- 1980 Honda GL 1100 Goldwing Interstate
- 1980 Honda GL 1100 Goldwing
- 1979 Honda GL 1000 Goldwing
- 1978 Honda GL 1000 Goldwing
- 1977 Honda GL 1000 Goldwing
- 1976 Honda GL 1000 Goldwing
- 1975 Honda GL 1000 Goldwing
31600-MG9-000
31600-MG9-010
31700-371-000
Dimensions:
Width: 80 mm
Height: 27 mm
Wires length: mm
Fixation holes center to center: 80 mm
Other specifications:
Number of pins: 8
Number of wires: 8
Minimum Charging Voltage: 14.5V +/- 0.5V
Maximum Charging Current: 50A/500W
Open Circuit Voltage: <15V
Operation Temperature: -20⁰ to 85⁰
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.
Brand new voltage regulator rectifier
- Direct replacement to your original unit.
- Plug-and-play, direct fit, easy installation.
- No assembly required
- The Quality exceeds the OEM equipment
- Higher grade of electric components.
- All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.