Voltage Regulator for Kawasaki Mojave 110 | Bayou 220 / 185 | KL 250 | KLR 250 | KLX 250 1984-2005 | # 21066-1052
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2005 Kawasaki KLR 250
- 2004 Kawasaki KLR 250
- 2003 Kawasaki KLX 250
- 2003 Kawasaki KLR 250
- 2002 Kawasaki KLR 250
- 2001 Kawasaki KLR 250
- 2000 Kawasaki KLR 250
- 1999 Kawasaki KLR 250
- 1998 Kawasaki KLR 250
- 1997 Kawasaki KLR 250
- 1996 Kawasaki KLR 250
- 1995 Kawasaki KLR 250
- 1995 Kawasaki KLF 220 Bayou
- 1994 Kawasaki KLR 250
- 1994 Kawasaki KLF 220 Bayou
- 1993 Kawasaki KLR 250
- 1993 Kawasaki KLF 220 Bayou
- 1992 Kawasaki KLR 250
- 1992 Kawasaki KLF 220 Bayou
- 1991 Kawasaki KLR 250
- 1991 Kawasaki KLF 220 Bayou
- 1990 Kawasaki KLR 250
- 1990 Kawasaki KLF 220 Bayou
- 1989 Kawasaki KLR 250
- 1989 Kawasaki KLF 220 Bayou
- 1988 Kawasaki KLR 250
- 1988 Kawasaki KLF 220 Bayou
- 1988 Kawasaki KLF 185 Bayou
- 1988 Kawasaki KLF 110 E Mojave
- 1987 Kawasaki KLR 250
- 1987 Kawasaki KLF 185 Bayou
- 1987 Kawasaki KLF 110 E Mojave
- 1986 Kawasaki KLF 185 Bayou
- 1986 Kawasaki KL 250
- 1985 Kawasaki KLF 185 Bayou
- 1985 Kawasaki KL 250
- 1984 Kawasaki KL 600
Dimensions:
Width: 67 mm
Length: 71 mm
Height: 25 mm
Fixation holes center to center: 55 mm
Other specifications:
Number of plugs: 1
Number of pins: 6
Number of wires: 6
Minimum Charging Voltage: 14.5V +- 0.5V
Maximum Charging Current: 50A/500W
Open Circuit Voltage: 15V
Operation Temperature: -20⁰ to 85⁰
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Brand new voltage regulator rectifier
- Direct replacement to your original unit.
- Plug-and-play, direct fit, easy installation.
- No assembly required
- The quality exceeds the OEM equipment
- Improved heat sink and charging capabilities
- Higher grade of electric components.
- All shipped products are tested
We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause for repetitive electrical issues.
*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.