Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Qty:

Share This Product:

Vehicle Fitment

2007 Sea-doo 3D DI 950 cc
2006 Sea-doo Sportster LE 950 cc 130 HP
2006 Sea-doo 3D DI 950 cc
2005 Sea-doo Sportster LE 950 cc 130 HP
2004 Sea-doo Sportster LE 950 cc 130 HP
2004 Sea-doo 951 XP DI
2003 Sea-doo 951 XP DI
2003 Sea-doo 951 RX DI
2003 Sea-doo 951 LRV DI
2003 Sea-doo 951 GTX DI
2002 Sea-doo 951 RX DI LE
2002 Sea-doo 951 RX DI
2002 Sea-doo 951 LRV DI
2002 Sea-doo 951 GTX DI
2001 Sea-doo 951 RX DI
2001 Sea-doo 951 GTX DI
2000 Sea-doo 951 RX DI
2000 Sea-doo 951 GTX DI

Interchange Part No

290888650
290888652
290888651
420888656
420888652

Specifications

Dimensions :
Interior diameter : 35 mm
Exterior diameter : 93 mm
Thickness : 22 mm
Length of wires stator to plug : 115 mm

Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3

Wire to wire resistance :
Alternator : Yellow to Yellow = 0.7 ohms +-20%

Installation

Before installing your new stator

Check the AC output of the stator
Replace any burned or corroded connectors on stator and regulatorrectifier
Check and repair any melted wiring
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010'.

Details