Stator Pickup Pulsar Coil for Yamaha YFM 550 Grizzly YFM 700 Grizzly 2007-2015 2019 2020

$USD 29.00
Availability: In stock
SKU
RM00107
28P-81410-00-00
28P-81410-01-00
3B4-81410-00-00
Dimensions:
Height: 19 mm
Length: 23 mm
Width: 19 mm
Bracket center to center: 35 mm
Wires length : 800 mm

Other specifications:
Number of wires : 2
Number of pins: 2

Wire to wire resistance:
Red to White = 500 ohms +/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.

  • By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
  • Insulate your solders with heat shrink.
  • Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
  • Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
  • If no spark or erratic spark, switch the wires at the plug.

Brand new pick up coil for Stator 500 ohms

  • We offer a brand new pickup/pulsar coil for you to repair your stator.
  • Often unavailable from the OEM manufacturer
  • All products shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Stator Pickup Pulsar Coil for Yamaha YFM 550 Grizzly YFM 700 Grizzly 2007-2015 2019 2020
Your Rating
Customers Also Viewed
Currently there is no product to display.