Stator Pickup Pulsar Coil for Yamaha YFS 200 Blaster / YSR 50 1987-2006

• 2006 Yamaha YFS 200 Blaster
• 2005 Yamaha YFS 200 Blaster
• 2004 Yamaha YFS 200 Blaster
• 2003 Yamaha YFS 200 Blaster
• 2002 Yamaha YFS 200 Blaster
• 2001 Yamaha YFS 200 Blaster
• 2000 Yamaha YFS 200 Blaster
• 1999 Yamaha YFS 200 Blaster
• 1998 Yamaha YFS 200 Blaster
• 1997 Yamaha YFS 200 Blaster
• 1996 Yamaha YFS 200 Blaster
• 1995 Yamaha YFS 200 Blaster
• 1994 Yamaha YFS 200 Blaster
• 1993 Yamaha YFS 200 Blaster
• 1992 Yamaha YSR 50
• 1992 Yamaha YFS 200 Blaster
• 1991 Yamaha YSR 50
• 1991 Yamaha YFS 200 Blaster
• 1990 Yamaha YSR 50
• 1990 Yamaha YFS 200 Blaster
• 1989 Yamaha YSR 50
• 1989 Yamaha YFS 200 Blaster
• 1988 Yamaha YSR 50
• 1988 Yamaha YFS 200 Blaster
• 1987 Yamaha YSR 50

Dimensions:
Height: 23 mm
Length: 28 mm
Width: 15 mm

• By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
• Insulate your solders with heat shrink.
• Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
• Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010ﾒﾒ.
• If no spark or erratic spark, switch the wires at the plug.