Stator pour Arctic Cat Wildcat / Wildcat 4 / Wildcat X / Wildcat 4X 1000 2012-2016
L’état de fonctionnement de la batterie a un impact important sur la stabilité du système électrique. Aucun stator ne peut fonctionner correctement avec une batterie faible ou défectueuse. Toujours charger votre batterie avant d’effectuer un test de votre système de charge ou avant de remplacer d’autres pièces. En cas de doute, faites un test de capacité de votre batterie ou remplacez-la.
- 2019 Textron Wildcat X 1000
- 2018 Textron Wildcat X 1000
- 2018 Arctic Cat Wildcat 4X 1000
- 2016 Arctic Cat Wildcat X 1000
- 2016 Arctic Cat Wildcat 4X 1000
- 2015 Arctic Cat Wildcat X 1000
- 2015 Arctic Cat Wildcat 4X 1000
- 2015 Arctic Cat Wildcat 1000
- 2014 Arctic Cat Wildcat X 1000
- 2014 Arctic Cat Wildcat 4X 1000
- 2014 Arctic Cat Wildcat 4 1000
- 2014 Arctic Cat Wildcat 1000
- 2013 Arctic Cat Wildcat X 1000
- 2013 Arctic Cat Wildcat 4 1000
- 2013 Arctic Cat Wildcat 1000
- 2012 Arctic Cat Wildcat 1000
0802-072
Dimenssions
Interior Diameter : 54 mm
Exterior Diameter : 126 mm
Thickness : 20 mm
Number of wires : 5
Number of plugs : 2
Alternator : Yellow to Yellow = 0.4 ohms +/- 20 %
Pickup Coil : Blue to White = 200 ohms +/- 20 %
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new silicon stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pickup coil included
- Connector included
- All product shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.