Free standard shipping on orders over $50! Read our Shipping Policy for details.
Free expedited shipping on orders over $99 in continental US! Read our Shipping Policy for details.
Contact Us
Shop By Vehicle

Kit Stator + Regulator for Triumph Daytona 675 2006-2017 | Daytona 675R 2011-2012 | Street Triple 675 / 675R 2008-2017

RMSTATOR
SKU: RMS900-106045
In Stock
RMSTATOR

Kit Stator + Regulator for Triumph Daytona 675 2006-2017 | Daytona 675R 2011-2012 | Street Triple 675 / 675R 2008-2017

$326.78
This product fits your
Close
FITMENT WARNING:
This product does not fit your
Close
This product is ride specific
Close
Shop By Vehicle

Battery condition is extremely important. No stator or voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Read more
Kit Stator + Regulator for Triumph Daytona 675 2006-2017 | Daytona 675R 2011-2012 | Street Triple 675 / 675R 2008-2017
Kit Stator + Regulator for Triumph Daytona 675 2006-2017 | Daytona 675R 2011-2012 | Street Triple 675 / 675R 2008-2017
$326.78
image
image
image
image

Details

Brand new aftermarket Stator + Voltage Regulator Kit

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • All shipped products are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Stator
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Pick up pulsar coil included
  • Connectors included
  • Rubber grommet included

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

Voltage Regulator Rectifier
  • No assembly required
  • Higher grade of electric components
  • The quality exceeds the OEM equipment

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and are a major cause of repetitive electrical issues.

Specifications

Stator

Dimensions :
Interior diameter : 42 mm
Exterior diameter : 115 mm
Thickness : 22 mm
Length of wires stator to grommet : 120 mm
Length of wires grommet to plug : 530 mm
Length of pickup coil's wire to grommet : 150 mm

Other specifications :
Number of wires : 5
Number of plugs : 2
Number of pins : 5
Number of poles : 18

Wire to wire resistance :
Alternator 3p : Black between each Black = 1 ohm +-20%
Pickup : Green to Blue = 200 ohms +-20%
Alternator to ground = O.L

Voltage Regulator

Dimensions:
Width: 82 mm
Length: 94 mm
Height: 28 mm
Wires length: 183 mm
Fixation holes center to center: 73 mm

Other specifications:
Number of plugs: 2
Number of pins: 7
Number of wires: 7
Minimum Charging Voltage: 14.5 V +- 0.5 V
Maximum Charging Current: 50 A / 500 W
Open Circuit Voltage: < 15 V
Operation Temperature: -20? to 85?

Interchange Part Nº

  • Stator :

    T1300039
  • Voltage Regulator :

    T1300823
  • T1301234

Installation

Before installing your new Stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulator rectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator might have a different wire color code than your original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".

Before installing your new Voltage Regulator Rectifier:

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator rectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments

Vehicle Fitments
Have a question?

Our customers are our most important asset, we are here to help you in real time! Call us now, or connect with a specialist via email.