Generator Stator for Kawasaki KFX 90 2007-2017 2019-2024 | Kymco Mongoose 2009-2010
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !
- 2024 Kawasaki KFX 90
- 2023 Kawasaki KFX 90
- 2022 Kawasaki KFX 90
- 2021 Kawasaki KFX 90
- 2020 Kawasaki KFX 90
- 2019 Kawasaki KFX 90
- 2017 Kawasaki KFX 90
- 2016 Kawasaki KFX 90
- 2015 Kawasaki KFX 90
- 2014 Kawasaki KFX 90
- 2013 Kawasaki KFX 90
- 2012 Kawasaki KFX 90
- 2011 Kawasaki KFX 90
- 2010 Kymco Mongoose 90
- 2010 Kawasaki KFX 90
- 2009 Kymco Mongoose 90
- 2009 Kawasaki KFX 90
- 2008 Kawasaki KFX 90
- 2007 Kawasaki KFX 90
21003-Y002
21003-Y006
31120-LBD4-90B
31120-LBD4-90A
31120-LBD4-900
Dimensions :
Interior diameter : 29 mm
Exterior diameter : 88 mm
Thickness : 10 mm
Length of wires stator to grommet : 110 mm
Length of wires grommet to plug : 325 mm
Length of pickup coil's wire to grommet : 30 mm
Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3
Number of poles : 8
Wire to wire resistance :
Alternator #1 : Yellow to White = 0.5 ohms +-20%
Alternator #2 : Yellow to ground = 1 ohms +-20%
Alternator #3 : White to ground = 1.1 ohms +-20%
Pickup : Blue / Yellow to Ground = 104 ohms +-20%
Before installing your new stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new aftermarket Stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Pick up pulsar coil included
- Connectors included
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.