Generator Stator for Victory Standard Sport Deluxe Touring Cruiser Special Edition Vegas Ness 8 Ball Kingpin 1999-2006
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !
- 2006 Victory Vegas 8 Ball
- 2006 Victory Vegas
- 2006 Victory Touring Cruiser
- 2006 Victory Cory Ness Jackpot
- 2005 Victory Vegas 8 Ball
- 2005 Victory Vegas
- 2005 Victory Touring Cruiser
- 2005 Victory Kingpin
- 2005 Victory Cory Ness Jackpot
- 2004 Victory Vegas 8 Ball
- 2004 Victory Vegas
- 2004 Victory Touring Cruiser
- 2004 Victory Kingpin
- 2004 Victory Cory Ness Jackpot
- 2003 Victory Vegas 8 Ball
- 2003 Victory Vegas
- 2003 Victory Touring Cruiser
- 2003 Victory Cory Ness Jackpot
- 2003 Victory Classic Cruiser
- 2002 Victory Touring Cruiser
- 2002 Victory Standard Cruiser
- 2002 Victory Deluxe Cruiser
- 2001 Victory Standard Cruiser
- 2001 Victory Sport Cruiser
- 2001 Victory Deluxe Cruiser
- 2000 Victory Standard Cruiser
- 2000 Victory Sport Cruiser
- 2000 Victory Special Edition
- 1999 Victory Standard Cruiser
Interior diameter : 41 mm
Exterior diameter : 124 mm
Thickness : 34 mm
Length of wires stator to grommet : 140 mm
Length of wires grommet to plug : 220 mm
Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3
Wire to wire resistance :
Alternator : Black between each Black = 0.7 ohms +-20%
Before installing your new stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulatorrectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Connector included
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.