KIT Stator + Voltage Regulator for Kohler Tractor CH11-CH15 CV11-CV15 KT17 KT19 All Years
Dimensions :
Interior diameter : 78 mm
Exterior diameter : 138 mm
Thickness : 10 mm
Length of wires stator to terminal : 650 mm
Other specifications :
Number of wires : 2
Number of pins : 3
Wire to wire resistance :
Alternator : White To White = 0.4 ohms +/-20%
Voltage regulator rectifier
Dimensions :
Width : 37 mm
Length : 80 mm
Height : 18 mm
Fixation holes center to center : 68mm
Other specifications :
Number of plugs : 1
Number of terminals : 3
Before installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.
Brand new stator + voltage regulator rectifier kit
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- All product shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Stator
Brand new aftermarket stator
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
Voltage Regulator Rectifier
Brand new aftermarket voltage regulator rectifier
- No assembly required
- Higher grade of electric components.
- The quality exceeds the OEM equipment