Pickup coil for Ski-Doo Expedition / Grand Touring / GSX / MX Z / Rave / Renegade / Skandic / Tundra 380 / 550 1998-2020

CAD$ 43.00
Availability: In stock
SKU
RMS040-106972
420665161
420966545
420966546
420665160
420665163
420665162
420966547
420966548
420966544
420966543

Dimensions:
Height: 28 mm
Length: 22.8 mm
Width: 18.55 mm
Distance between fixation holes: 35 mm
Wires length: 600 mm

Other specifications:
Number of wires: 2
Wires length: 600 mm
Number of connector: 1
Wire to wire resistance: White to Blue
= ohms +/-20% 200

Not following these instructions may result in damaging the part or other components on your vehicle

  • By using a small soldering iron, weld the wires to the ones on your OEM wiring harness
  • Insulate your solders with heat shrink
  • Before attempting to start your vehicle, adjusting the air gap is necessary for certain models
  • Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010"
  • If no spark or erratic spark, switch the wires at the plug

Brand new Pick up Coil for Stator 500 ohms

  • We offer a brand new pickup/pulsar coil for you to repair your stator
  • Often unavailable from the OEM manufacturer
  • All products shipped are tested

*All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Pickup coil for Ski-Doo Expedition / Grand Touring / GSX / MX Z / Rave / Renegade / Skandic / Tundra 380 / 550 1998-2020
Your Rating
Customers Also Viewed
Currently there is no product to display.