Stator + Stator Cover Gasket for Suzuki GSXR 600 750 2006-2016

CAD$ 209.00
Availability: In stock
Dimensions :
Interior diameter : 36mm
Exterior diameter : 106mm
Thickness : 8mm
Length of wires stator to grommet : 60 mm
Length of wires grommet to plug : 315 mm

Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins :3

Wire to wire resistance :
Alternator : Yellow Between each Yellow = 0.4 ohms +/-20%

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Brand new aftermarket stator and Gasket kit

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Gasket included
  • Connector included
  • Rubber grommet included
  • All products shipped are tested

At RMSTATOR, we believe that proper installation guarantees a longer lifetime. This is why we include, at no extra charge, a stator cover gasket and a dielectric grease tube.
Consult the connectorメs circle of death for more information on dielectric grease.

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Stator + Stator Cover Gasket for Suzuki GSXR 600 750 2006-2016
Your Rating
Customers Also Viewed
Currently there is no product to display.