Improved Stator for SEM Replacement Husaberg Husqvarna European Models 1999-2003

CAD$ 269.00
Availability: In stock
SKU
RM01193

For Husqvarna models, compare the resistances of your original stator with ours on the "Specifications" tab.



    RM01192


    Pickup : Black To Green = 30 ohms +/-20%


    Source : Red To Black = 1300 ohms +/-20%


    RM01193


    Pickup : Black To Green = 179 ohms +/-20%


    Source : Red To Black = 1260 ohms +/-20%



For Husqvarna models, compare the resistances of your original stator with ours on the "Specifications" tab.



Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

RM01193-R00
250 202-01
250 286-01
250 272-01
250 285-01
250-285-01
Dimensions :
Interior diameter : 28mm
Exterior diameter : 91mm
Thickness : 23mm
Length of wires stator to plug : 700mm

Other specifications :
Number of wires : 6
Number of plugs : 6
Number of pins : 6

Wire to wire resistance :
Alternator :Yellow Between each Yellow = 0.4 ohms +/-20%
Pickup : Black To Green = 179 ohms +/-20%
Source : Red To Black = 1260 ohms +/-20%

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

This stator is an improved version of the original but it is a direct fit

Brand new improved SEM Direct replacment stator

  • Direct replacement of original SEM manufactured stator even if the look is different
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Produces a stronger spark when starting and offers a reliable performance
  • Pick up coil included
  • All product shipped are tested

All item pictures are accurate

This stator has a different design than your original how ever it is a direct fit.
Write Your Own Review
You're reviewing:Improved Stator for SEM Replacement Husaberg Husqvarna European Models 1999-2003
Your Rating
Customers Also Viewed
Currently there is no product to display.