Kit Stator + HP CDI Box for Polaris Magnum 425 Sportsman 335 400 500 Worker 335 Xplorer 500 Ranger 500 1995-2004

CAD$ 274.00
Availability: In stock
SKU
RM22816
RM22816-R00
Stator
Interior diameter : 42mm
Exterior diameter : 105mm
Thickness : 32mm
Length of wires stator to grommet : 140mm
Length of wires grommet to plug : 1000mm
Length of pickup coil's wire to grommet : 70mm

Other specifications :
Number of wires : 9
Number of plugs : 7
Number of pins : 12

Wire to wire resistance :
Alternator : Yellow to Yellow/Red = 0.4ohms +/-20%
Pickup : White/Red to White = 115ohms +/-20%
Source : Black/Red to Green = 450ohms +/-20%
Source 2 : Red to Green = 4.1ohms +/-20%

CDI Box
Height: 70 mm
Length: 23 mm
Width: 38 mm

Other specifications:
Number of plugs: 5
Number of pins: 8

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

CDI Box

Our CDI may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This CDI is designed as a direct plug-in replacement and should be used as such.

Brand new kit Stator + High performance CDI Box

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • All shipped products are tested

*All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Stator
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
High Performance CDI Box
  • Enhanced timing curve, increased rev limiter (approximately 1000 rpm)
  • Higher grade of electronic components
  • The Quality exceeds the OEM equipment

Note: The OEM 3086982 has 2 possibles CDI's for some Polaris models, please compare your original part with our product before purchasing

Write Your Own Review
You're reviewing:Kit Stator + HP CDI Box for Polaris Magnum 425 Sportsman 335 400 500 Worker 335 Xplorer 500 Ranger 500 1995-2004
Your Rating
Customers Also Viewed
Currently there is no product to display.