Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Qty:

Share This Product:

Vehicle Fitment

2024 Polaris Phoenix 200
2023 Polaris Phoenix 200
2022 Polaris Phoenix 200
2021 Polaris Phoenix 200
2020 Polaris Phoenix 200
2019 Polaris Phoenix 200
2018 Polaris Phoenix 200
2017 Polaris Phoenix 200
2016 Polaris Phoenix 200
2015 Polaris Phoenix 200
2014 Polaris Phoenix 200
2013 Polaris Phoenix 200
2012 Polaris Phoenix 200
2011 Polaris Phoenix 200
2010 Polaris Phoenix 200
2009 Polaris Phoenix 200
2008 Polaris Phoenix 200
2007 Polaris Sawtooth 200
2007 Polaris Phoenix 200
2006 Polaris Sawtooth 200
2006 Polaris Phoenix 200
2005 Polaris Phoenix 200

Interchange Part No

0452449
0454228
0454947

Specifications

Dimensions :
Interior diameter : 35mm
Exterior diameter : 95mm
Thickness : 15mm
Length of wires stator to grommet : 110mm
Length of wires grommet to plug : 560mm
Length of pickup coil's wire to grommet : 90mm

Other specifications :
Number of wires : 5
Number of plugs : 1
Number of pins : 5

Wire to wire resistance :
Alternator : Yellow between each Yellow = 0.4ohms +/-20%
Pickup : Blue/White to Green (Ground) = 150ohms +/-20%

Installation

Check the AC output of the stator.

Replace any burned or corroded connectors on stator and regulator/rectifier

Check and repair any melted wiring.

Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Details