Stator + Crankcase Cover Gasket for Yamaha YXR700 Rhino / YXM700 Viking / YXC700 Viking VI 2008-2018

• 2018 Yamaha YXM 700 Viking
• 2018 Yamaha YXC 700 Viking VI
• 2017 Yamaha YXM 700 Viking
• 2017 Yamaha YXC 700 Viking VI
• 2016 Yamaha YXM 700 Viking
• 2016 Yamaha YXC 700 Viking VI
• 2015 Yamaha YXM 700 Viking
• 2015 Yamaha YXC 700 Viking VI
• 2014 Yamaha YXM 700 Viking
• 2013 Yamaha YXR 700 Rhino
• 2012 Yamaha YXR 700 Rhino
• 2011 Yamaha YXR 700 Rhino
• 2009 Yamaha YXR 700 Rhino
• 2008 Yamaha YXR 700 Rhino

RM01191G-R00

Dimensions Stator :
Interior diameter : 41 mm
Exterior diameter : 105 mm
Thickness : 19 mm
Length of wires stator to grommet : 65 mm
Length of wires grommet to plug : 400 mm
Length of pickup coil's wire to grommet : 65 mm

Other specifications :
Number of wires : 5
Number of plugs : 3
Number of pins : 5

Wire to wire resistance :
Alternator : White to White = 0.4 ohms +/-20%
Pickup : White to Grey = 500 ohms +/-20%

Before installing your new Stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".