Stator for Arctic Cat Bearcat 440 | Cheetah 500 | Cougar 550 | El Tigre EXT 530 | Wildcat 700 1984-2005 | OEM# 3003-400

CAD$ 244.00
Availability: In stock
SKU
RM01300

Please Note: Our fitment information and OEM part number cross reference is correct per OEM information. However, we have noticed some sleds built with, or parts having been replaced by a different stator & CDI box. There are 2 common systems used on these sleds, the difference being the 3-wire stator source coil connector has 2 MALE or 2 FEMALE terminals. The wire colors in this connector are Black/Red, White/Red, and Black/White. Please inspect your stator connector to be sure which model you have, and order the correct part number below.


System 1:

If your stator 3-wire connector has 2-FEMALE and 1-MALE terminals:


  • Stator Part Number: RM01352

  • CDI Box Part Number: RM02099


System 2, Option A:

If your stator 3-wire connector has 1-FEMALE and 2-MALE terminals and your CDI Box has 2 rubber connectors:


  • Stator Part Number: RM01300

  • CDI Box Part Number: RM02016

  • Kit Part Number: RMS900-108218


System 2, Option B:

If your stator 3-wire connector has 1-FEMALE and 2-MALE terminals and your CDI Box has 1 rubber connector:


  • Stator Part Number: RM01300

  • CDI Box Part Number: RM02177

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

3003-584
3004-043
3003-326
3003-400
3002-887
3003-157
3003-010
3003-533
3003-379
3005-375
3003-976
3003-578
3004-833
3004-829
3003-570
3003-567
3003-569
3003-532
3004-971

Dimensions :
Interior diameter: 40 mm
Exterior diameter: 113 mm
Thickness: 18 mm
Length of wires stator to plug: 240 mm

Other specifications :
Number of wires: 8
Number of plugs: 2
Number of pins: 8

Wire to wire resistance :
Alternator: Yellow to Yellow = 0.5 ohms +/-20%
Source: Black/Red to Black/White = 200 ohms +/-20%
Source 2: White/Red to Black/Red = 20 ohms +/-20%

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.

Brand new aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius.
  • Connector included
  • Back Plate included
  • All product shipped are tested

Note : There are 2 possible stators for the OEM 3005-346, please compare your original part with our picture.

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Stator for Arctic Cat Bearcat 440 | Cheetah 500 | Cougar 550 | El Tigre EXT 530 | Wildcat 700 1984-2005 | OEM# 3003-400
Your Rating
Customers Also Viewed
Currently there is no product to display.