High Output Stator for Honda TRX 90 Fourtrax / Sportrax 1993-2005

• 2005 Honda TRX 90 Sportrax
• 2004 Honda TRX 90 Sportrax
• 2003 Honda TRX 90 Sportrax
• 2002 Honda TRX 90 Sportrax
• 2001 Honda TRX 90 Sportrax
• 2000 Honda TRX 90 Sportrax
• 1999 Honda TRX 90 Sportrax
• 1998 Honda TRX 90 Sportrax
• 1997 Honda TRX 90 Sportrax
• 1996 Honda TRX 90 Sportrax
• 1995 Honda TRX 90 Sportrax
• 1994 Honda TRX 90 Sportrax
• 1993 Honda TRX 90 Sportrax

Dimensions :
Interior diameter : 28 mm
Exterior diameter : 83 mm
Thickness : 24 mm
Length of wires stator to grommet : 75 mm
Length of wires grommet to plug : 260 mm
Length of pickup coil's wire to grommet : 150 mm

Other specifications :
Number of wires : 5
Number of plugs : 5
Number of pins : 5

Wire to wire resistance :
Alternator : Ground to Yellow = 0.4 ohms +/-20%
Pickup : Blue/Yellow to Ground = 150 ohms +/-20%
Source : Black/Red to Green = 500 ohms +/-20%

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

If you do not add a headlight and/or taillight, the yellow wire from the stator is not required and should be secured

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".