Stator Pickup Pulsar Coil 200 ohms for Honda TRX 680 Rincon 2006-2014
Number of wires : 2
Number of terminals: 2
Wires length :
Wire to wire resistance:
= 200 ohms +/-20%
- By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
- Insulate your solders with heat shrink.
- Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
- Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010ﾒﾒ.
- If no spark or erratic spark, switch the wires at the plug.
Brand new pick up coil 200 ohms
- We offer a brand new pickup/pulsar coil for you to repair your stator.
- Often unavailable from the OEM manufacturer
- All products shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.