Generator Stator for Yamaha YZF R6 2006-2020
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2020 Yamaha YZF R6 600
- 2019 Yamaha YZF R6 600
- 2018 Yamaha YZF R6 600
- 2017 Yamaha YZF R6 600
- 2016 Yamaha YZF R6 600
- 2015 Yamaha YZF R6 600
- 2014 Yamaha YZF R6 600
- 2013 Yamaha YZF R6 600
- 2012 Yamaha YZF R6 600
- 2011 Yamaha YZF R6 600
- 2010 Yamaha YZF R6 600
- 2009 Yamaha YZF R6 600
- 2008 Yamaha YZF R6 600
- 2007 Yamaha YZF R6 600
- 2006 Yamaha YZF R6 600
Interior diameter: 41 mm
Exterior diameter: 114 mm
Thickness: 13 mm
Number of wires: 3
Number of plugs: 1
Number of pins: 3
Wire to wire resistance:
Alternator: Between each Red = 0.2 ohms +/-20%
Before installing your new stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010''.
Brand new aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius.
- Connector included
- All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.