Stator Pickup Pulsar Coil 200 ohms for Honda TRX 680 Rincon 2006-2014
$USD 34.00
Availability: In stock
SKU
RM00132
31120-HN8-A60
31120-HN8-A61
31120-HN8-A62
31120-HN8-A61
31120-HN8-A62
Dimensions:
Height: 18 mm
Length: 25 mm
Width: 22 mm
Other specifications:
Number of wires: 2
Number of pins: 2
Wire to wire resistance: Blue to Green = 200 ohms +/-20%
Not following these instructions may result in damaging the part or other components on your vehicle.
- By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
- Insulate your solders with heat shrink.
- Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
- Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010メメ.
- If no spark or erratic spark, switch the wires at the plug.
Brand new pick up coil 200 ohms
- We offer a brand new pickup/pulsar coil for you to repair your stator.
- Often unavailable from the OEM manufacturer
- All products shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Write Your Own Review