Stator for Polaris Ranger | RZR 4 | RZR | Sportsman 700 / 800 2006-2017 | OEM# 4011982 / 4014399 / 4014034
This product only includes the stator. For the complete stator/flywheel kit, please see RMS900-108154.
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2017 Polaris Ranger 800 6x6
- 2016 Polaris Ranger 800 6x6
- 2015 Polaris Ranger 800 6x6
- 2014 Polaris Sportsman 800 EFI
- 2014 Polaris Sportsman 800 6x6 EFI
- 2014 Polaris Ranger Crew 800
- 2014 Polaris Ranger 800
- 2014 Polaris RZR 800 S
- 2014 Polaris RZR 800 EFI
- 2014 Polaris RZR 4 800
- 2013 Polaris Sportsman 800 Forest EFI
- 2013 Polaris Sportsman 800 EFI
- 2013 Polaris Sportsman 800 6x6 EFI
- 2013 Polaris Ranger Crew 800
- 2013 Polaris Ranger 800
- 2013 Polaris RZR 800 S
- 2013 Polaris RZR 800 EFI
- 2013 Polaris RZR 4 800
- 2012 Polaris Sportsman 800 Forest EFI
- 2012 Polaris Sportsman 800 EFI
- 2012 Polaris Sportsman 800 6x6 EFI
- 2012 Polaris Ranger Crew 800
- 2012 Polaris Ranger 800 XP
- 2012 Polaris Ranger 800 6x6
- 2012 Polaris Ranger 800
- 2012 Polaris RZR 800 S
- 2012 Polaris RZR 800 EFI
- 2012 Polaris RZR 4 800
- 2011 Polaris Sportsman 800 EFI
- 2011 Polaris Sportsman 800 Big Boss
- 2011 Polaris Sportsman 800 6x6 EFI
- 2011 Polaris Ranger Crew 800
- 2011 Polaris Ranger 800 6x6
- 2011 Polaris Ranger 800
- 2011 Polaris RZR 800 S
- 2011 Polaris RZR 800 EFI
- 2011 Polaris RZR 4 800
- 2010 Polaris Sportsman 800 EFI
- 2010 Polaris Sportsman 800 Big Boss
- 2010 Polaris Sportsman 800 6x6 EFI
- 2010 Polaris Ranger Crew 800
- 2010 Polaris Ranger 800 6x6
- 2010 Polaris Ranger 800
- 2010 Polaris RZR 800 S
- 2010 Polaris RZR 800 EFI
- 2010 Polaris RZR 4 800
- 2009 Polaris Sportsman X2 800
- 2009 Polaris Sportsman 800 Touring
- 2009 Polaris Sportsman 800 HO
- 2009 Polaris Sportsman 800 EFI
- 2009 Polaris Sportsman 800 6x6 EFI
- 2009 Polaris Ranger Crew 700
- 2009 Polaris Ranger 700 6x6 EFI
- 2009 Polaris Ranger 700
- 2009 Polaris RZR 800 S
- 2009 Polaris RZR 800 EFI
- 2008 Polaris Sportsman X2 800
- 2008 Polaris Sportsman X2 700
- 2008 Polaris Sportsman 800 Touring
- 2008 Polaris Sportsman 800 HO
- 2008 Polaris Sportsman 800 EFI
- 2008 Polaris Ranger Crew 700
- 2008 Polaris Ranger 700 6x6 EFI
- 2008 Polaris Ranger 700
- 2008 Polaris RZR 800 EFI
- 2007 Polaris Ranger 700 XP
- 2007 Polaris Ranger 700 6x6 EFI
- 2007 Polaris Ranger 700
- 2006 Polaris Ranger 700 XP
- 2006 Polaris Ranger 700
4014034
4011399
Interior diameter : 40 mm
Exterior diameter : 106 mm
Thickness : 24 mm
Length of wires stator to grommet : 45 mm
Length of wires grommet to plug : 100 mm
Other specifications :
Number of wires : 4
Number of plugs : 1
Number of pins : 4
Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4ohms +/-20%
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Connector included
- Rubber grommet included
- All product shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.