Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Qty:

Share This Product:

Vehicle Fitment

2009 Honda TRX 300 X
2008 Honda TRX 300 EX Sportrax
2007 Honda TRX 300 EX Sportrax
2006 Honda TRX 300 EX Sportrax
2005 Honda TRX 300 EX Sportrax
2004 Honda TRX 300 EX Sportrax
2003 Honda TRX 300 EX Sportrax
2002 Honda TRX 300 EX Sportrax
2001 Honda TRX 300 EX Sportrax
2000 Honda TRX 300 EX Sportrax
1999 Honda TRX 300 EX Sportrax
1998 Honda TRX 300 EX Sportrax
1997 Honda TRX 300 EX Sportrax
1996 Honda TRX 300 EX Sportrax
1995 Honda TRX 300 EX Sportrax
1994 Honda TRX 300 EX Sportrax
1993 Honda TRX 300 EX Sportrax

Interchange Part No

31120-HM3-671

Specifications

Dimensions :
Interior diameter : 35mm
Exterior diameter : 93mm
Thickness : 15mm
Length of wires stator to grommet : 95mm
Length of wires grommet to plug : 75mm, 275mm, 540mm

Other specifications :
Number of wires : 6
Number of plugs : 3
Number of pins : 7

Wire to wire resistance :
Alternator : Yellow Between Each Yellow = 0.4ohms +/-20%

Installation

Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Details