Stator for Arctic Cat Carb Bearcat 570 F 570 Mountain Cat 1000 570 Thundercat 1000 Z 440 Sno Pro 2000-2014
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2020 Arctic Cat Lynx 2000 Carb L/C
- 2019 Arctic Cat Lynx 2000 Carb L/C
- 2018 Arctic Cat Lynx 2000 Carb L/C
- 2018 Arctic Cat Bearcat 2000 EFI L/C
- 2017 Arctic Cat Lynx 2000 Carb L/C
- 2017 Arctic Cat Bearcat 2000 EFI L/C
- 2016 Arctic Cat Lynx 2000 Carb L/C
- 2016 Arctic Cat Bearcat 2000 EFI L/C
- 2015 Arctic Cat Lynx 2000 Carb L/C
- 2015 Arctic Cat Bearcat 2000 EFI L/C
- 2014 Arctic Cat T 570 Carb F/C
- 2014 Arctic Cat F 570 Carb F/C
- 2014 Arctic Cat Bearcat 570 XTE Carb F/C
- 2014 Arctic Cat Bearcat 570 XT Carb F/C
- 2014 Arctic Cat Bearcat 570 Carb F/C
- 2013 Arctic Cat T 570 Carb F/C
- 2013 Arctic Cat F 570 Carb F/C
- 2013 Arctic Cat Bearcat 570 XT Carb F/C
- 2012 Arctic Cat T 570 Carb F/C
- 2012 Arctic Cat F 570 Carb F/C
- 2012 Arctic Cat Bearcat 570 XT Carb F/C
- 2011 Arctic Cat T 570 Carb F/C
- 2011 Arctic Cat F 570 Carb F/C
- 2011 Arctic Cat Bearcat 570 XT Carb F/C
- 2010 Arctic Cat T 570 Carb F/C
- 2010 Arctic Cat F 570 Carb F/C
- 2010 Arctic Cat Bearcat 570 XT Carb F/C
- 2009 Arctic Cat T 570 Carb F/C
- 2009 Arctic Cat F 570 Carb F/C
- 2009 Arctic Cat Bearcat 570 XT Carb F/C
- 2008 Arctic Cat Bearcat 570 Carb F/C
- 2007 Arctic Cat Z 570 LX Carb F/C
- 2007 Arctic Cat Z 570 Carb F/C
- 2007 Arctic Cat Panther 570 Carb F/C
- 2007 Arctic Cat Bearcat 570 Carb F/C
- 2006 Arctic Cat Z 570 LX Carb F/C
- 2006 Arctic Cat Z 570 Carb F/C
- 2006 Arctic Cat Panther 570 Carb F/C
- 2006 Arctic Cat Bearcat 570 Carb F/C
- 2005 Arctic Cat Z 570 LX Carb F/C
- 2005 Arctic Cat Z 570 Carb F/C
- 2005 Arctic Cat Sabercat 500 LX Carb L/C
- 2005 Arctic Cat Sabercat 500 Carb L/C
- 2005 Arctic Cat Panther 570 Carb F/C
- 2005 Arctic Cat M5 500 Carb L/C
- 2005 Arctic Cat Bearcat 570 Carb F/C
- 2004 Arctic Cat Z 570 LX Carb F/C
- 2004 Arctic Cat Z 570 Carb F/C
- 2004 Arctic Cat Sabercat 500 LX Carb L/C
- 2004 Arctic Cat Sabercat 500 Carb L/C
- 2004 Arctic Cat Panther 570 Carb F/C
- 2004 Arctic Cat Mountain Cat 570 Carb F/C
- 2004 Arctic Cat Bearcat 570 Carb F/C
- 2003 Arctic Cat Z 570 ESR Carb F/C
- 2003 Arctic Cat Z 570 Carb F/C
- 2003 Arctic Cat Z 440 Sno Pro Carb F/C
- 2003 Arctic Cat Panther 570 Carb F/C
- 2003 Arctic Cat Mountain Cat 570 Carb F/C
- 2002 Arctic Cat Z 570 SS Carb F/C
- 2002 Arctic Cat Z 570 ESR Carb F/C
- 2002 Arctic Cat Z 570 Carb F/C
- 2002 Arctic Cat Z 440 Sno Pro Carb F/C
- 2002 Arctic Cat Thundercat 1000 Carb L/C
- 2002 Arctic Cat Panther 570 Carb F/C
- 2002 Arctic Cat Mountain Cat 570 Carb F/C
- 2002 Arctic Cat Mountain Cat 1000 Carb L/C
- 2001 Arctic Cat ZRT 800 Carb L/C
- 2001 Arctic Cat Z 440 Sno Pro Carb F/C
- 2001 Arctic Cat Thundercat 1000 Carb L/C
- 2001 Arctic Cat Pantera 1000 Carb L/C
- 2001 Arctic Cat Mountain Cat 1000 Carb L/C
- 2000 Arctic Cat ZRT 800 Carb L/C
- 2000 Arctic Cat Thundercat 1000 Mountain Cat Carb L/C
- 2000 Arctic Cat Thundercat 1000 Carb L/C
- 2000 Arctic Cat Pantera 1000 Carb L/C
3005-636
Wire to wire resistance
Alternator : Yellow to Yellow = 0.8 ohms +/- 20%
Source 1 : Green to Black = 16 ohms +/- 20 %
Source 2 : Green to Brown = 16 ohms +/- 20 %
Dimension
Interior diameter : 38 mm
Exterior diameter : 99 mm
Thickness : 20 mm
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
Brand new stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade of lamination materials
- Highest grade of copper windings, resistant to 200 degrees Celsius
- The quality exceeds the OEM equipment
- Connector included
- All product shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.